Startec provides expert 24/7 emergency response service. If you are dealing with a critical equipment failure or other emergency situation contact us immediately at 1-800-555-9439
Learn more about Startec's emergency response service.
Liquid Ring Compressors
JACKFISH III BITUMEN TANK VRU PACKAGE
SituationOur customer needed to handle hot, wet, dirty, heavy ... > Details
Extreme Sour Gas Compression
40+% H2S
15 High-Spec Compression Packages A top ten global petroleum producer came to Startec with a ... > Details
Dewpoint Control - Pakistan
Significant Environmental Challenges
The Pakistan Petroleum Limited (PPL) Adam X-1 Hala Early Production Facility project involved ... > Details
Major Carbon Capture Project
| Application | CO2 Recovery |
|---|---|
| Client | Enhance Energy |
| Compressor Manufacturer | Howden WRVi series |
| Location | Redwater, Alberta |
| Method | Screw Compression |
| Oil & Gas | Refrigeration |
| Size | 1500-1750 HP |
Alberta Carbon Trunk Line Project
Our Client had the requirement to liquefy 800 tones per day of Carbon Dioxide (CO2) from a large fertilizer plant near Redwater, AB as part of the Alberta Carbon Trunk Line project, the first major carbon capture storage program in the province.
The purpose is to liquefy CO2 emissions from this plant so it can be transported via a 240-km pipeline to conventional oil recovery projects throughout central Alberta where it will be injected into oil reservoirs to provide enhanced oil recovery (EOR).
The CO2 is brought into the facility and immediately sent to inlet condensers and then to inlet separation to separate the bulk of the free water in the stream. The CO2 will then be compressed by 6 stage integrally geared centrifugal compressors and be moved into the dehydration plant, to get rid of the remaining water, after which the refrigeration unit Startec designed will liquefy it so that it can be pumped into the carbon trunk line.
Startec Solution
Startec manufactured a 18'W x 30'L skid mounted CO2 liquefaction & NH3 refrigeration compressor package, using one (1) 100% refrigeration compressor. Our design includes:
- Duty 770 TR - Refrigerant R 717 Ammonia
- One (1) 1750 HP Motor Driven Howden WRVi-321-165-50 Screw Compressor
- One (1) 15 HP Motor driven CO2 booster pump
- Drain oil pot vessel
- Compressor lube oil system
- Compressor oil cooling plate & frame exchanger
- Vertical low temperature separator & economizer vessel
Miscellaneous:
- Two (2) horizontal condensers
- One (1) horizontal accumulator mount on an open skid
- Chiller/Surge vessel , CO2 Pre-cooler heat exchanger, senior meter run will be mounted on a outside structure CO2 MSH pump shipped loose
Contact Startec
To discuss the specifications of your CO2 recovery projects, contact a Startec Oil & Gas Customer Representative at (403) 295-5855 or toll free at 1-800-555-9439.