Archimedes Was Right! Archimedes developed the screw pump as a bilge water bailing device. But his concept is also an ideal technology for oil and gas applications.
Learn more about the amazing capabilities of screw compressors.
Dewpoint Control - Pakistan
Significant Environmental Challenges
The Pakistan Petroleum Limited (PPL) Adam X-1 Hala Early Production Facility project involved ... > Details
Major Carbon Capture Project
Alberta Carbon Trunk Line Project
Our Client had the requirement to liquefy 800 tones per day ... > Details
Vapour Recovery Unit - Oil Sands
High CO2 H2S & O2 Content
A large oil sands petroleum producer required a custom solution ... > Details
200HP Pre-engineered Package
For natural gas producers who insist on the highest quality equipment to achieve maximum reliability and operational life, Startec offers pre-engineered compression packages.
Faster Deployment & Lower Capital Costs
Designed for conventional or slightly sour gas production, the pre-engineered packages offer faster deployment and lower capital costs than complete custom solutions.
Comprised of high quality standard components, the compression packages are engineered to withstand the extreme weather conditions of the western Canadian sedimentary basin. The pre-engineered packages can also be configured with optional equipment to accommodate specific field conditions or individual client preferences.
200HP Specifications
Engine
- Caterpillar G3306TA 203HP
- Altronic III ignition (Class 1, Div II)
- TDI low pressure gas starter
- Fuel gas filter w/ automatic shut off valve
- Murphy vibration switch
- Kenco auto oil level controller with low level shut down
- Oil day tank
- Silex silencer
Compressor
- Howden XRV 204-145-50 (Variable Vi) Oil Flooded Rotary Screw Compressor
- Robust design provides long operational life
- Manual capacity control slide valve, 30 to 100%
Inlet Scrubber
- 30" OD x 6', design rating of 250 psig
- w/ demister pad
- CRN registered, AB/BC/SK ASME VIII Div 1
Oil Separator
- 24" OD x 8', design rating of 350 psig
- Removable Coalescing filter element
- Full flow PSV
- Level gauge
- CRN registered AB/BC/SK ASME VIII Div 1
Cooling System
- Reduce cold weather operating problems and freeze up
- Indirect oil cooling provided via a flat plate oil/glycol heat exchanger
- Induced draft cooler
Control Panel
- Murphy TTD Panel, Class 1 Div II
Packaging
- Standard oil field type insulated building enclosure c/w 2 - 18,000 BTU heaters
- All piping and vessels designed to code, ANSI B31.3, ASME VIII
- Vessels include 1/8" corrosion allowance
- Building 11'6"W x 18'10"L x 11'0" H c/w white perforated liner
Startec also offers a 95HP pre-engineered compression package.
Contact Startec
To order, or discuss the specifications of our pre-engineered compression packages, contact a Startec Oil & Gas Customer Representative at 403.295-5855 or toll free at 1-800-555-9439